For those pesky loose pieces of laminate that stick out from a countertop side, the fix is easy.
The treatment depends on the cause of the problem.
So, FIRST try this: Set a regular clothes iron to a medium setting. Get a flat piece or block of wood of any thickness of over 1/3 inch. Then iron the laminate by rubbing back and forth while holding the laminate against the countertop side. Do this for about 60 to 80 seconds only. Then hold the wood block tightly against the laminate for about 90 to 120 seconds. This should reactivate the existing glue and set it in place.
If this doesn't work, more contact cement is needed. SECONDLY, try this: Get some contact cement (which is a gooey, snot looking, glue and can be bought anywhere you'd find school or hardware supplies). Apply thinly, with a popscicle stick or similar thin & stiff item if the brush doesn't reach, on the underside of the laminate and also on the surface of the counter it will be stuck to. Wait until the glue is partially dry or tacky. Tacky is when you stick your finger on it and it is sticky but the glue doesn't come off onto your finger. Then apply your piece of wood and then a C-clamp (or any clamp that will fit the space). Then let it sit for at least 24 hours in regular temperatures. In very hot temperatures, it may take longer for the glue to set.
THIRDLY: if this doesn't work, then a replacement piece of laminate might be needed. Since lots, dyes, or designs become obsolete so quickly it is recommended that this replacement be handled without delay.
Most problems with loose laminate will be solved with the first recommendation above. The second recommendation happens about 1/3 of the time.
The treatment depends on the cause of the problem.
So, FIRST try this: Set a regular clothes iron to a medium setting. Get a flat piece or block of wood of any thickness of over 1/3 inch. Then iron the laminate by rubbing back and forth while holding the laminate against the countertop side. Do this for about 60 to 80 seconds only. Then hold the wood block tightly against the laminate for about 90 to 120 seconds. This should reactivate the existing glue and set it in place.
If this doesn't work, more contact cement is needed. SECONDLY, try this: Get some contact cement (which is a gooey, snot looking, glue and can be bought anywhere you'd find school or hardware supplies). Apply thinly, with a popscicle stick or similar thin & stiff item if the brush doesn't reach, on the underside of the laminate and also on the surface of the counter it will be stuck to. Wait until the glue is partially dry or tacky. Tacky is when you stick your finger on it and it is sticky but the glue doesn't come off onto your finger. Then apply your piece of wood and then a C-clamp (or any clamp that will fit the space). Then let it sit for at least 24 hours in regular temperatures. In very hot temperatures, it may take longer for the glue to set.
THIRDLY: if this doesn't work, then a replacement piece of laminate might be needed. Since lots, dyes, or designs become obsolete so quickly it is recommended that this replacement be handled without delay.
Most problems with loose laminate will be solved with the first recommendation above. The second recommendation happens about 1/3 of the time.
No comments:
Post a Comment